ICEM 5.0 - double meshing -- CFD Online Discussion Forums

November 7, 2004, 06:09	ICEM 5.0 - double meshing	#1
Joan Guest Posts: n/a	Hi everyone. I tried to draw a concentric cylinder. The inner tube has inlet/outlet on the side and another pair in the midway. But everytime, i have double meshing (i am using hexa mesh). if i do the blockings and o-grids for the inner tube first and then the outer tube, the inlet/outlet on the side will have double meshing. if i do the other way round, and put the central block into VOFRON, the innertube will have double meshing. do anyone know how i can avoid double meshing? and how i can mesh this properly? thanks a lot. joan

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Continuing User Defined Real Gas Model issues	aeroman	FLUENT	6	April 8, 2016 03:34
New densitybased solver AeroFoam	giulio_romanelli	OpenFOAM Running, Solving & CFD	48	January 15, 2016 08:20
Parallel User Defined Real Gas Model	aeroman	FLUENT	4	July 1, 2015 06:09
Missing math.h header	Travis	FLUENT	4	January 15, 2009 11:48
REAL GAS UDF	brian	FLUENT	6	September 11, 2006 08:23

All times are GMT -4. The time now is 08:13.