CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Error when changing timestep in transient run

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 6, 2004, 11:05
Default Error when changing timestep in transient run
  #1
Tony
Guest
 
Posts: n/a
Hi, I sometimes got this error massage when I changed the timestep during the run(transient).

----------------

Error detected by routine PEEKCS

CDANAM= probe /MONP6/GVAR_WHERE

CRESLT=NONE

I don't have this problem before. Can anyone tell me what is it?

Thank you very much.
  Reply With Quote

Old   December 6, 2004, 17:37
Default Re: Error when changing timestep in transient run
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

The problem is actually with a monitor point.

Glenn Horrocks
  Reply With Quote

Old   December 6, 2004, 19:34
Default Re: Error when changing timestep in transient run
  #3
Tony
Guest
 
Posts: n/a
Yes, I can see that from "probe" in the error massage since I monitored pressure, temperature, density and velocity at three points. But I can't figure out the reason of that error.

Thanks.
  Reply With Quote

Old   December 7, 2004, 02:45
Default Re: Error when changing timestep in transient run
  #4
SAM
Guest
 
Posts: n/a
how?
  Reply With Quote

Old   December 8, 2004, 15:13
Default Re: Error when changing timestep in transient run
  #5
Astrid
Guest
 
Posts: n/a
I have been told that the bug will be fixed with 5.7.1. Similar strange features pop up when the the end time of a transient simulation will be changed on the run.

Astrid
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
About timestep in transient mod w0er CFX 5 March 6, 2005 17:36
transient run and residuals Mark Main CFD Forum 4 April 21, 2004 11:12
Timestep in transient flow Zaher CFX 2 March 13, 2004 03:48
Cycling a transient run Chetan Mistry Phoenics 0 March 3, 2004 10:50
changing time step during a run N Menon CFX 2 May 6, 2002 08:17


All times are GMT -4. The time now is 14:30.