|
[Sponsors] |
January 8, 2005, 01:16 |
copy/paste of Mesh and geometry
|
#1 |
Guest
Posts: n/a
|
Hello all,
I would like to know how to control the location of a geometry in CFX designmodler. For example, if I had drawn a circle and now want to copy or move it to another location, how to do it? Are there somewhere I can input the coordinates of the new location? Thanks. Gabbel |
|
January 8, 2005, 11:04 |
Re: copy/paste of Mesh and geometry
|
#2 |
Guest
Posts: n/a
|
You meant in ANSYS WORKBENCH£¿ That's easy to do the geometry translation if you have gone through some of the tutorials or been familiar with the common CAD software operation, such as PRO/E or something like that. You can move your circle by adjusting the distance between your circle center and a reference position.
|
|
January 1, 2018, 18:17 |
|
#3 |
New Member
Hamed
Join Date: Mar 2017
Location: Iran
Posts: 29
Rep Power: 8 |
Hi dears,
I have simulated a single container by details and then I wish to duplicate it as a bay with a lot of containers stack up over each other. so, I would like to know is there any way for me to duplicate the geometry in term of what I need? |
|
January 1, 2018, 19:22 |
|
#4 |
Super Moderator
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,655
Rep Power: 143 |
Twiti's comment applies:
This sounds like a simple geometry operation. Make sure you have done the tutorials so you understand the basics. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gambit problems | Althea | FLUENT | 22 | January 4, 2017 04:19 |
3D Hybrid Mesh Errors | DarrenC | ANSYS Meshing & Geometry | 11 | August 5, 2013 07:42 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 04:52 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 12:55 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 19:10 |