|
[Sponsors] |
January 30, 2005, 16:56 |
Gambit/CFX
|
#1 |
Guest
Posts: n/a
|
Is it possible to use a mesh created by Gambit in CFX ?
|
|
January 30, 2005, 20:02 |
Re: Gambit/CFX
|
#2 |
Guest
Posts: n/a
|
Yes, if you are using ICEM CFD with CFX. YOu can read the GAMBIT mesh into ICEM and write out a mesh to be read into CFX Pre.
Derrek |
|
January 30, 2005, 21:17 |
Re: Gambit/CFX
|
#3 |
Guest
Posts: n/a
|
May I ask what the export type should be in Gambit ? Thanks!
|
|
January 31, 2005, 01:36 |
Re: Gambit/CFX
|
#4 |
Guest
Posts: n/a
|
Icem 5.1 is capable to read a Fluent mesh (.msh). As far as I know, Icem 5.0 should also have this feature (at least you can find it as a mesh import option). Unfortunately, it does not work in that version... gives you a hint how well they test their software.
Maybe another idea: Gambit can export a mesh to read into Ansys and CFX should be able to read the same type. hope this helps, good luck! |
|
January 31, 2005, 03:15 |
Re: Gambit/CFX
|
#5 |
Guest
Posts: n/a
|
Yes, I try to use the Ansys format and it works. Thanks!
|
|
January 31, 2005, 09:31 |
Re: Gambit/CFX
|
#6 |
Guest
Posts: n/a
|
it didn't work on my machine though as I tried ANSYS export
|
|
January 31, 2005, 22:12 |
Re: Gambit/CFX
|
#7 |
Guest
Posts: n/a
|
For your reference: My Gambit version2.2.30, CFX5.7.1.
|
|
February 4, 2005, 09:26 |
Re: Gambit/CFX
|
#8 |
Guest
Posts: n/a
|
Export from fluent as CGNS file. Its working.
Regards, pp |
|
|
|