CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   Lightnin A310 impeller (https://www.cfd-online.com/Forums/cfx/20961-lightnin-a310-impeller.html)

Jeff February 2, 2005 01:18

Lightnin A310 impeller
 
Hello,All

Does anyone have experience of building an airfiol type impeller? For example, I want to model the A310 impeller shown in http://www.lightnin-mixers.com/axial_flow_imps.asp

However I still haven't gotten the detailed draw yet. Can anyone give some ideas of:

1. Where can I find detailed geometry info of such an impeller? 2. Is it easy to draw this with Mesh2CAD? if not, how to do that?

I would appreciate your any comments.

Jeff


Meri February 4, 2005 09:53

Re: Lightnin A310 impeller
 
My suggestion is to use Autocad or some CAD program that is versatile, create the solid and export ACIS or IGES file, which you could then mesh. If you look at a lot of pre-processor programs, all the difficult tutorials have the drawing done somewhere else, and they just do the clean up. Good luck

tawan March 6, 2005 23:47

Re: Lightnin A310 impeller
 
i need drawing Lightnin A310 impeller


All times are GMT -4. The time now is 08:09.