CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   CFX-5.7.1 on Intel Xeon & P4 EM64T (http://www.cfd-online.com/Forums/cfx/20977-cfx-5-7-1-intel-xeon-p4-em64t.html)

Sandeep February 8, 2005 13:40

CFX-5.7.1 on Intel Xeon & P4 EM64T
 
Dear All,

Does anyone know if CFX-5.7.1 will work on a Linux PC (Redhat Linux WS (v.3) for EM64T) with an Intel Xeon EM64T or P4 EM64T processor?

Many Thanks

Sandeep

Glenn Horrocks February 8, 2005 17:03

Re: CFX-5.7.1 on Intel Xeon & P4 EM64T
 
Hi,

Check the documentation or the website for a list of support platforms. However CFX does not currently support the 64 bit extensions to the Xeon or P4 chips, so you will be running in 32 bit mode only.

Glenn Horrocks

Sandeep February 9, 2005 05:15

Re: CFX-5.7.1 on Intel Xeon & P4 EM64T
 
I did check the community website & hardware requirements in the manual, but nothing was mentioned about these processors. I guess I should assume that unless explicitly stated, it probably isn't supported.

Do you know if the 64bit extensions to these processors will be supported in 5.8?

Sandeep

Glenn Horrocks February 9, 2005 17:41

Re: CFX-5.7.1 on Intel Xeon & P4 EM64T
 
Hi,

I understand the plan is to support Intel EM64T & AMD Opteron chips in 64 bit mode on SuSE 9.1, SuSE 8 and Redhat Enterprise 3.

Glenn Horrocks


All times are GMT -4. The time now is 08:09.