 |
 |
 |
|
|
|
[Sponsors] | ||||
March 21, 2005, 14:42
|
Coiled Geometry
|
#1 |
|
Guest
Posts: n/a
|
Does anybody know how doing to create a coiled geometry as showed in the tutorial 14 of CFX 5.6?
|
|
|
||
|
March 21, 2005, 16:15
|
Re: Coiled Geometry
|
#2 |
|
Guest
Posts: n/a
|
Hi,
Doesn't the tutorial show you how to do it? I thought that was the whole point of tutorials. Glenn Horrocks |
|
|
|
||
|
March 22, 2005, 05:33
|
Re: Coiled Geometry
|
#3 |
|
Guest
Posts: n/a
|
There're some easy steps to build the coil mesh: step1: Use your familiar CAD tools (for ex. CATIA V4) to create the tank/coil geometry (*note:it's very easy to create this geometry in CAD!) step2: Use ICEM_CFD to import from catia V4 or other media type(iges, step ...) step3: then, you can mesh it now and export mesh file to be used in CFX_PRE
|
|
|
|
||
|
March 22, 2005, 13:27
|
Re: Coiled Geometry
|
#4 |
|
Guest
Posts: n/a
|
Hi, Tanks for you response. Unhappily, the tutorial doesn't present as drawing the geometry, just to define the mesh.
Maurício |
|
|
|
||
|
March 24, 2005, 06:12
|
Re: Coiled Geometry
|
#5 |
|
Guest
Posts: n/a
|
See the tutorial of Workbench (start using CFX 5.7.1 would say)
|
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem Importing Geometry ProE to CFX | fatb0y | CFX | 3 | January 14, 2012 19:42 |
| [Gmsh] Problem meshing an imported geometry | Alicia | OpenFOAM Meshing & Mesh Conversion | 0 | March 30, 2010 04:53 |
| Simulation of Flow through Complex 3D Geometry | EmersonKB | CFX | 5 | July 2, 2009 08:17 |
| vitual _ real | deneb | FLUENT | 3 | January 22, 2007 04:31 |
| coiled geometry again | Maurício | CFX | 1 | April 1, 2005 06:56 |
Linear Mode
