Prism Elements -- CFD Online Discussion Forums

April 20, 2005, 06:03	Prism Elements	#1
ashish Guest Posts: n/a	Hi, Many thanks to Glenn for solving my earlier query. I did the same thing to generate the prism and it worked. However a small problem yet, I extruded the tet-surface mesh in z-direction to form the prism elements. But i wanted to give symmetry boundary conditions on front and back faces. When i did it CFX crashed until unless i broke the each prism elements in 3 layers (i just want to decrease the number of elements)!! why ? Could i not give symmetry on front and back in single element and still solve the problem !! many thanks for help regards, Ashish

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Fixing tetra Surface Orientations after prism generation	siw	ANSYS Meshing & Geometry	14	December 1, 2015 15:54
MESH ERROR	Francesco - University of Florence, Italy	CFX	2	April 24, 2008 11:10
Icemcfd: Preventing prism inflation collisions?	Joe	CFX	1	July 31, 2007 09:13
[Gmsh] Modified gmshToFoam to help import hexahedral and prism elements from Gmsh	adorean	OpenFOAM Meshing & Mesh Conversion	1	April 18, 2005 08:19
CFX4.3 -build analysis form	Chie Min	CFX	5	July 12, 2001 23:19

All times are GMT -4. The time now is 03:24.