CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Error detected by routine PEEKR

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 6, 2005, 01:28
Default Error detected by routine PEEKR
  #1
zhxc
Guest
 
Posts: n/a
When using homogeneous binary mixture based on a redlich kwong equation of state,the following error is appeared. Details of error:- ---------------- Error detected by routine PEEKR CDANAM = PABSMIN/VALUE CRESLT = NONE

****** PROBLEM REPORT ****** Subsystem: Input Subroutine name: ErrAction Severity level: Fatal Error Error message number: 001100279 Stopped in routine MEMERR

How to solve this error. Thanks very much.

The following is the fluids list:

Fluids List = H2ORKvl COMPONENT: H2ORKl Option = Equilibrium Fraction END COMPONENT: H2ORKv Option = Equilibrium Constraint END

MATERIAL: H2ORKl

Material Description = Wet water (H2O), Liquid

Material Group = Wet Redlich Kwong

Option = Pure Substance

Thermodynamic State = Liquid

PROPERTIES:

Option = General Material

DYNAMIC VISCOSITY:

Option = Rigid Non Interacting Sphere Model

END

EQUATION OF STATE:

Acentric Factor = 0.344

Boiling Temperature = 373.15 [K]

Critical Pressure = 220.64 [bar]

Critical Temperature = 647.14 [K]

Critical Volume = 55.95 [cm^3 mol^-1]

Molar Mass = 18.015 [kg kmol^-1]

Option = Redlich Kwong

END

SPECIFIC HEAT CAPACITY:

Maximum Temperature = 1000 [K]

Minimum Temperature = 100 [K]

Option = Redlich Kwong Polynomial

Zero Pressure a1 = 4.395

Zero Pressure a2 = -4.186e-3 [K^-1]

Zero Pressure a3 = 1.405e-5 [K^-2]

Zero Pressure a4 = -1.564e-8 [K^-3]

Zero Pressure a5 = 0.632e-11 [K^-4]

END

THERMAL CONDUCTIVITY:

Option = Modified Eucken Model

END

END

END

MATERIAL: H2ORKv

Material Description = Wet water vapour (H2O), Vapour

Material Group = Wet Redlich Kwong

Option = Pure Substance

Thermodynamic State = Gas

PROPERTIES:

Option = General Material

DYNAMIC VISCOSITY:

Option = Rigid Non Interacting Sphere Model

END

EQUATION OF STATE:

Acentric Factor = 0.344

Boiling Temperature = 373.15 [K]

Critical Pressure = 220.64 [bar]

Critical Temperature = 647.14 [K]

Critical Volume = 55.95 [cm^3 mol^-1]

Molar Mass = 18.015 [kg kmol^-1]

Option = Redlich Kwong

END

SPECIFIC HEAT CAPACITY:

Maximum Temperature = 1000 [K]

Minimum Temperature = 100 [K]

Option = Redlich Kwong Polynomial

Zero Pressure a1 = 4.395

Zero Pressure a2 = -4.186e-3 [K^-1]

Zero Pressure a3 = 1.405e-5 [K^-2]

Zero Pressure a4 = -1.564e-8 [K^-3]

Zero Pressure a5 = 0.632e-11 [K^-4]

END

THERMAL CONDUCTIVITY:

Option = Modified Eucken Model

END

END

END

MATERIAL: H2ORKvl

Binary Material1 = H2ORKv

Binary Material2 = H2ORKl

Material Description = Wet Water Vapour (H2O)

Material Group = Wet Redlich Kwong

Option = Homogeneous Binary Mixture

SATURATION PROPERTIES:

Option = Redlich Kwong

END

END END

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error detected by routine PEEKR dada1204 CFX 3 October 25, 2010 21:09
user subroutine error CFDUSER CFX 2 December 9, 2006 07:31
Error message subroutine PEEKR Vanessa CFX 0 August 31, 2006 14:17
user defined function cfduser CFX 0 April 29, 2006 11:58
Error detected by routine PEEKR Crash CFX 2 February 13, 2006 01:27


All times are GMT -4. The time now is 04:32.