CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Timestep for transient simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 27, 2005, 08:39
Default Timestep for transient simulation
  #1
houman
Guest
 
Posts: n/a
Hi, I'm modeling a "bubble column" (by CFX5.6) and running a transient simulation (steady state didn't work) I have almost 200,000 elements and I'm using 0.05 s, timesteps, the residual curves are not smooth and after 200 time steps, the imbalace eqs. aren't converged, yet! so, I guess my timestep 0.05s is very small. (there are almost 8 loop iterations for each timestep) so, am I on the right track or shall I make some changes?!? would appreciate any comments...

regards, houman
  Reply With Quote

Old   April 27, 2005, 19:51
Default Re: Timestep for transient simulation
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

What are you trying to do? 8 iterations per timestep for a multi-phase simulation is fairly normal.

Regards, Glenn Horrocks
  Reply With Quote

Old   April 28, 2005, 04:44
Default Re: Timestep for transient simulation
  #3
houman
Guest
 
Posts: n/a
Hi Glenn, Many thanks for your reply, you are right, I am working on a two phase simulation (gas & water). so I don't have to worry about it Regards, Houman
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Resume Transient simulation HMR CFX 1 June 28, 2011 22:13
interTrackFoam timestep virginie_e OpenFOAM Running, Solving & CFD 4 April 6, 2009 06:02
Overflow problem in steady simulation ReeKo CFX 11 October 8, 2008 18:57
Timestep for Free Surface simulation jh CFX 0 February 13, 2003 00:55
transient simulation: natural convection problem? Basics CFX 3 September 25, 2002 10:42


All times are GMT -4. The time now is 03:17.