CFD Online Discussion Forums

CFD Online Discussion Forums (
-   CFX (
-   -   editing run in progress (

houman April 27, 2005 09:07

editing run in progress
I got error message when changing the timestep in transient simulation:

ERROR #001100279 has occurred in subroutine ErrAction. Message: Dynamic CCL reread is not currently supported for transient simulations. The run will continue without modification.

Can somebody help me in this regard? thanks in advance... houman

Glenn Horrocks April 27, 2005 18:31

Re: editing run in progress

Just as the message says, editting of a transient run in progress is not supported. If you want to change the timestep of a transient run you have to either set it up before using CEL or fortran; or stop the run, make the change and restart.

Adaptive timestepping is coming in CFX 5.8. It should be released in the next few months. Hopefully that should help you.

Glenn Horrocks

houman April 28, 2005 03:54

Re: editing run in progress
Hi Glenn, thanks for your notice. I have another simple question: is it possible to stop a transient run at the e.g. 5th min. (then change the timestep) and restart it from the rest (and not form 0th min), if yes, pls let me know how?

Regards, houman

Glenn Horrocks May 1, 2005 19:00

Re: editing run in progress

Yes, you can do that. As long as your variable initialation is set to "automatic" or "automatic with value" and you use the first run as the initial condition, it will then continue the simulation from where the first one stopped.


houman May 2, 2005 04:08

Re: editing run in progress
Hi Glenn, Thanks for your reply...

All times are GMT -4. The time now is 00:48.