CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

thinwalls vs CFX-5

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 10, 2005, 08:45
Default thinwalls vs CFX-5
  #1
costas
Guest
 
Posts: n/a
hi..I was using CFX-4 some ages ago i had a model sort of pipe in pipe system where the inner pipe was cut in the midle so i was was using thin walls boundaries to repredsent the patches in cfx-4 and that worked nice. Im trying to do this in CFX-5, when i try to define those inner walls (the faces) as walls i get the message that the faces im trying to define are not part of an external boundary . Any of you have an idea on how to define those internal walls?

Best regards

  Reply With Quote

Old   May 15, 2005, 04:56
Default Re: thinwalls vs CFX-5
  #2
Jeff
Guest
 
Posts: n/a
As long as there's a surface region there, it should work. There's also a toggle button in Pre which allows you to create the matching opposite face of the wall. Try that.

Jeff
  Reply With Quote

Old   May 16, 2005, 03:00
Default Re: thinwalls vs CFX-5
  #3
costas
Guest
 
Posts: n/a
thanks Jeff that worked fine!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Proper way to name boundaries on 2D model for use in CFX? RossFS ANSYS Meshing & Geometry 4 November 10, 2011 03:38
Pros and Cons for CFX, CFdesign, COMSOL Val Main CFD Forum 3 June 10, 2011 02:20
CFX pressure in Simulations problem nasdak CFX 1 April 14, 2010 13:22
PhD using CFX Rui CFX 9 May 28, 2007 05:59
CFX 4.4 installation problem Pandu Sattvika CFX 1 December 1, 2001 05:07


All times are GMT -4. The time now is 07:44.