CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Redhat Linux/CFX (http://www.cfd-online.com/Forums/cfx/21301-redhat-linux-cfx.html)

Meri May 31, 2005 19:17

Redhat Linux/CFX
 
I recently loaded cfx5.7 on a machine with redhat 9.0, I was suprised that it did not run. I checked the cfx website and it shows it should run under Redhat 9.0 Here is the error message I got, perhaps there is a way to fix it

CFX-5.7 (C) 1996-2004 CFX Ltd. All rights reserved./home/cfd5/cfx57/CFX-5.7/bin/linux/Launcher.exe: relocation error: /home/cfd5/cfx57/Shared/qt-3.2.3-1/lib/Linux/libqt-mt.so.3: symbol _res, version GLIBC_2.0 not defined in file libc.so.6 with link time reference An error has occurred in cfx5:

The CFX Launcher /home/cfd5/cfx57/CFX-5.7/bin/linux/Launcher.exe exited with return code 127.

James Date June 1, 2005 05:43

Re: Redhat Linux/CFX
 
Try this.

In the CFX-5.7.1 installation manual page 22 it says that to use CFX-5.7.1 on Linux RedHat 9.0 platforms you need to install an RPM which patches the system to GLIBC version 2.3.2-27.9.4 or later. This RPM is available at http://rpmfind.net/linux/RPM/redhat/...-27.9.7.i686.h tml. You can check which version you have installed using the command: rpm -q glibc

A workaround while you are checking this is to use CFX-Pre with mesa (software) graphics rather than hardware graphics. You can do this by running CFX-Pre from the command line using cfxpre -gr mesa

James


All times are GMT -4. The time now is 01:56.