CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

PARTICLE INJECTION REGIONS - ERROR!!!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 5, 2005, 10:56
Default PARTICLE INJECTION REGIONS - ERROR!!!
  #1
SC
Guest
 
Posts: n/a
Hello there...

I am trying to insert a particle into a rotating fluid domain in 5.7.1 (particle transport model). I want to give the particle an initial velocity as cylindrical velocity components:

Vr = -0.01 m/s

Vtheta = -0.085 m/s

Vz = 0m/s

I get the following error from the CFX solver:

** NO TT DATA FOUND FOR SEARCH KEY: PIR: CYLINDRICAL VELOCITY

COMPONENTS,Value

** Error concerning: PIR

STOP called from routine GET_TTOBJ

+-----------------------------------------------------+

| An error has occurred in cfx5solve: |

| |

|/export/home/cfx5.7.1/CFX- 5.7.1/bin/solaris/cclsetup|

| .exe exited |

| with return code 1. |

+-----------------------------------------------------+

This run of the CFX-5 Solver has finished.

Only get this problem with Cylindrical vel components. I'd appreciate any suggestions.

Many Thanks in advance

SC
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Native ParaView Reader Bugs tj22 OpenFOAM Paraview & paraFoam 267 July 20, 2015 22:29
Building OpenFOAM1.7.0 from source ata OpenFOAM Installation 42 May 14, 2012 20:48
Accessing phi from a fvPatchField at same patch johndeas OpenFOAM 1 September 13, 2010 20:23
DecomposePar links against liblamso0 with OpenMPI jens_klostermann OpenFOAM Bugs 11 June 28, 2007 17:51
user subroutine error CFDUSER CFX 2 December 9, 2006 07:31


All times are GMT -4. The time now is 22:37.