CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

GETTING THE NODES NUMBER FOR A SPECIFIC SURFACE

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 20, 2005, 06:11
Default GETTING THE NODES NUMBER FOR A SPECIFIC SURFACE
  #1
CHGL
Guest
 
Posts: n/a
Hi all,

I have run a steady state thermal problem of a rotating disc with straigth channels. I have exported the data for the WALL HEAT TRANSFER COEFFICIENT and the WALL ADJACENT TEMPERATURE (csv file), these data preceded by the node numbers.

I want to know how I can select from these data, the corresponding data (say node numbers) for a specific set of surfaces: the 4 walls of the channels and their inlet/outlet surfaces. I need to know this in order to perform further calculations with these numbers.

Any idea is welcomed.

Regards

CHGL
  Reply With Quote

Old   July 20, 2005, 07:28
Default DO NOT ANSWER PLEASE... I FOUND IT
  #2
Carl
Guest
 
Posts: n/a
THKS.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mesh file for flow over a circular cylinder Ardalan Main CFD Forum 7 December 15, 2020 14:06
[snappyHexMesh] SnappyHexMesh for internal Flow vishwa OpenFOAM Meshing & Mesh Conversion 24 June 27, 2016 09:54
Nusselt number variation over a ribbed surface avi031 FLUENT 2 March 10, 2011 13:09
Constant velocity of the material Sas CFX 15 July 13, 2010 09:56
Unaligned accesses on IA64 andre OpenFOAM 5 June 23, 2008 11:37


All times are GMT -4. The time now is 20:38.