CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

request for IGES file

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 13, 2005, 14:04
Default request for IGES file
  #1
jacob
Guest
 
Posts: n/a
Hi, This is jacob. Can u send me the full aircraft model for flow analysis???? Please feel free to send this file in IGES format.

One more doubt for me, that is " before going for modelling of an aircraft, we have to make one rectagular box(test section), can u give me the guide lines how to create and what is the dimensions of this box? Thanking u jacob.
  Reply With Quote

Old   August 14, 2005, 04:42
Default Re: request for IGES file
  #2
indrajit
Guest
 
Posts: n/a
Hi Jacob !

I dont have file to send u, i can give some guidelines on creation of box.

if u are going to impose subsonic conditions just doubled dimensions of the aircraft will be enough or tak tyripple. if going for high speed increase it little more for supersonic it should be atleast twice or thrice. bye
  Reply With Quote

Old   August 14, 2005, 19:18
Default Re: request for IGES file
  #3
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

You should also confirm the size of the bounding domain is large enough by doing a dependancy check. That is run a few sizes and choose the size large enough to give the level of accuracy you need. Obviously the more accurate the results you want the larger the domain you will require.

Glenn Horrocks
  Reply With Quote

Old   August 15, 2005, 12:14
Default Re: request for IGES file
  #4
jacob
Guest
 
Posts: n/a
Hi Indrajit, Thank you very very much for ur kind response for my doubt. Greetings Jacob
  Reply With Quote

Old   August 15, 2005, 14:00
Default How to create Rectangular box around Aircraft Mode
  #5
jacob
Guest
 
Posts: n/a
Hi everyone, I am just learning CFX. I have got on one Aircraft modes in IGES format from the web. I want to do flow analysis, but before that i have to create one RECTANGULAR BOX(Test section). Some body(Mr. Indrajit and Mr.Glenn) has given me the idea that what is the rectangular geometry specifications. Thanks for them. But i want to create that RECTANGULAR BOX now. Now I have Aircraft IGES file now. How to draw the RECTANGULAR BOX using CFX BUILD. Please can u give me the guidlines to draw the rectangular box. In advance thank u very much for all Regards Jacob.
  Reply With Quote

Old   August 16, 2005, 05:29
Default Re: How to create Rectangular box around Aircraft
  #6
Meri
Guest
 
Posts: n/a
First creat a b-rep solid using your iges file. Then once that is done go into geometry, enter xyz coordinates for the 4 corners of your box, then create 4 curves, use 2 of the parallel curves to create a surface. Take that surface and translate it the length of your box. Now you have 2 surfaces, create a solid using the surface. There, you have 2 solids, your domain and the b-rep solid. Now you can mesh it.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[OpenFOAM.com] OpenFOAM 1.7.1 installation on LINUX UBUNTU 10.10 electrosin OpenFOAM Installation 40 May 31, 2016 06:11
Problem installing on Ubuntu 9.10 -> 'Cannot open : No such file or directory' mfiandor OpenFOAM Installation 2 January 25, 2010 10:50
[Gmsh] Compiling gmshFoam with OpenFOAM-1.5 BlGene OpenFOAM Meshing & Mesh Conversion 10 August 6, 2009 05:26
Compiling OpenFOAM13 on AMD64 with Redhat Enterprise mbeaudoin OpenFOAM Installation 20 June 17, 2008 07:43
DxFoam reader update hjasak OpenFOAM Post-Processing 69 April 24, 2008 02:24


All times are GMT -4. The time now is 01:46.