CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

A way of creating blocks in ICEM for seal region

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 22, 2005, 12:21
Default A way of creating blocks in ICEM for seal region
  #1
Mustafa T
Guest
 
Posts: n/a
Experts,

I'm stuggling to find a good way of generating a good mesh for the knife edge seal region with honey coomb present. I'm using ICEM blocking technique. But I notice, I'm not able to get much control over mesh density and my mesh is becoming large enough. I attach a picture showing you the case. Please let me is there a way by which I can have fine mesh in the tooth gap region and coarse mesh in the pocket region. Honey coomb mesh got finner mesh at the top
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
dsmcInitialise - dsmcFoam archymedes OpenFOAM Pre-Processing 94 July 15, 2016 17:14
[Commercial meshers] Using starToFoam clo OpenFOAM Meshing & Mesh Conversion 33 September 26, 2012 05:04
[Other] StarToFoam error Kart OpenFOAM Meshing & Mesh Conversion 1 February 4, 2010 05:38
A way of creating blocks in ICEM for seal region Mustafa T CFX 1 August 23, 2005 04:37
[Gmsh] Import gmsh msh to Foam adorean OpenFOAM Meshing & Mesh Conversion 24 April 27, 2005 09:19


All times are GMT -4. The time now is 11:24.