CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

A way of creating blocks in ICEM for seal region

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 22, 2005, 11:24
Default A way of creating blocks in ICEM for seal region
  #1
Mustafa T
Guest
 
Posts: n/a
Experts,

I couldnot attach a picture.

I'm stuggling to find a good way of generating a good mesh for the knife edge seal region with honey coomb present. I'm using ICEM blocking technique. But I notice, I'm not able to get much control over mesh density and my mesh is becoming large enough. I attach a picture showing you the case. Please let me is there a way by which I can have fine mesh in the tooth gap region and coarse mesh in the pocket region. Honey coomb mesh got finner mesh at the top

Thanks in advance Mustafa
  Reply With Quote

Old   August 23, 2005, 03:37
Default Re: A way of creating blocks in ICEM for seal regi
  #2
hdj
Guest
 
Posts: n/a
You have to make some additional splits, maybe auxiliary points and curves, and then carefully associate your block topology model with seal geometry.

There are several meshing laws available in ICEM CFD for controlling mesh density on each edge. Have a look at "Meshing Tutorial".

Best regards, hdj
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
dsmcInitialise - dsmcFoam archymedes OpenFOAM Pre-Processing 94 July 15, 2016 16:14
Using starToFoam clo OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 33 September 26, 2012 04:04
StarToFoam error Kart OpenFOAM Meshing & Mesh Conversion 1 February 4, 2010 05:38
A way of creating blocks in ICEM for seal region Mustafa T CFX 0 August 22, 2005 11:21
Import gmsh msh to Foam adorean Open Source Meshers: Gmsh, Netgen, CGNS, ... 24 April 27, 2005 08:19


All times are GMT -4. The time now is 13:00.