CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Patran Paver Mesh Mode

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 1, 2005, 20:48
Default Patran Paver Mesh Mode
  #1
Soon
Guest
 
Posts: n/a
Hi there,

I'm trying to have a mesh as symmetry as I can in CFX and I know that Patran Paver Mesh Mode maybe could produce some improvement in Mesh.

But I couldn't find any function to activate this both in CFX-Mesh and ICEM.

Is there anyone have been doing this before? Thank you very much and every single advice is appreciated. Thanks.

Regards Soon
  Reply With Quote

Old   September 2, 2005, 11:51
Default Re: Patran Paver Mesh Mode
  #2
Myron
Guest
 
Posts: n/a
ICEM CFD does have a surface paver (surface mesh only) - but you need the QUAD or AIQUAD. This will give you paved quads or tris or combination. Then you can extrude that surface mesh.

If you want periodic faces and one-to-one node matching on those faces - you'll need to describe your periodic conditions before running the mesh. This is in the Model Mesh Parameters area. Then the Tetra mesh will match the periodicity automatically.
  Reply With Quote

Old   October 16, 2005, 04:53
Default Re: Patran Paver Mesh Mode
  #3
mehul
Guest
 
Posts: n/a
Hi u can do it in cfx.as far as i know about cfx 5.6 u can go to tool>mesh mode an u ca nselect from three mesh modes.Default is AFI. oyhers are patran and isomesh.hope it helps u. regards

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
non-smooth mesh Svensson OpenFOAM Native Meshers: snappyHexMesh and Others 11 January 18, 2012 10:13
Netgen - Queries Batchmode & Verbose Mode shivaprasad123 Open Source Meshers: Gmsh, Netgen, CGNS, ... 1 July 17, 2011 11:06
Importing Patran mesh into Gambit Trac FLUENT 1 September 29, 2005 10:32
Patran Mesh mode Maurício CFX 0 May 24, 2005 12:57
unstructured vs. structured grids Frank Muldoon Main CFD Forum 1 January 5, 1999 11:09


All times are GMT -4. The time now is 09:24.