CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

how to use turboGrid to generate full Fan's mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 8, 2005, 16:10
Default how to use turboGrid to generate full Fan's mesh
  #1
go
Guest
 
Posts: n/a
I understand the TurboGrid can generate a single blade mesh. How to generate full Fan's mesh. Thanks
  Reply With Quote

Old   September 9, 2005, 08:02
Default Re: how to use turboGrid to generate full Fan's me
  #2
gwang
Guest
 
Posts: n/a
You don't need to generate mesh for a full fan TurboGrid. What you need is just a mesh for one single passage. After you import this single passage mesh into CFX-Pre, you can copy it to a full fan mesh. By the way, you need to glue those copies together.
  Reply With Quote

Old   September 9, 2005, 13:45
Default Re: how to use turboGrid to generate full Fan's me
  #3
go
Guest
 
Posts: n/a
Could you show me how to glue them. Thanks
  Reply With Quote

Old   September 9, 2005, 15:46
Default Re: how to use turboGrid to generate full Fan's me
  #4
gwang
Guest
 
Posts: n/a
You can find all the information in "Rotation Transformation" under "Mesh Transformation Editor" section of CFX mannual.
  Reply With Quote

Old   September 15, 2005, 15:48
Default Re: how to use turboGrid to generate full Fan's me
  #5
go
Guest
 
Posts: n/a
How to deal with Periodic face. Thanks
  Reply With Quote

Old   September 15, 2005, 21:39
Default Re: how to use turboGrid to generate full Fan's me
  #6
longbow
Guest
 
Posts: n/a
When you glue those copies together, there will be no interfaces between them. Periodic surfaces exist only when you just model several blade passages. For a full fan, there should be no periodic surfaces.
  Reply With Quote

Old   September 16, 2005, 09:40
Default Re: how to use turboGrid to generate full Fan's me
  #7
go
Guest
 
Posts: n/a
Thanks longbow. I would like to know how to deal with Periodic surfance. Do you have any idea?
  Reply With Quote

Old   September 16, 2005, 18:07
Default Re: how to use turboGrid to generate full Fan's me
  #8
longbow
Guest
 
Posts: n/a
In order for people to help you, you probably need to give a little more information on what you want to do and what's problem you are facing.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
SnappyHexMesh for internal Flow vishwa OpenFOAM Native Meshers: snappyHexMesh and Others 24 June 27, 2016 08:54
[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM kawamatt2 ANSYS Meshing & Geometry 17 December 20, 2011 12:45
snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Native Meshers: snappyHexMesh and Others 2 March 27, 2011 21:11
Convergence moving mesh lr103476 OpenFOAM Running, Solving & CFD 30 November 19, 2007 15:09
unstructured vs. structured grids Frank Muldoon Main CFD Forum 1 January 5, 1999 11:09


All times are GMT -4. The time now is 17:18.