Mesh problems for a stirred vessel with baffles! -- CFD Online Discussion Forums

September 14, 2005, 10:19	Mesh problems for a stirred vessel with baffles!	#1
UY Guest Posts: n/a	Hi, all, I am dealing with a stirred vessel with baffles using CFX 5.7.1. I found that it's very hard to achieve a reasonable convergence, let's day, RMS 10^-4. I suspected the mesh quality. So I tried to improve it in CFX-mesh. Since I am very new with this software, I don't where I should look at and what kind of meshes are desired for this problem. I have a rotating impeller in the vessel and baffles. Please provide your precious suggestions. Thanks in advance!

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problems scaling down the mesh of a stirred tank (GGI, icoDyMFoam)	Tobb	OpenFOAM	2	February 7, 2013 13:06
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
How to mesh stirred tank with hexahedral mesh?	boh_tea	FLUENT	3	March 15, 2011 03:48
[snappyHexMesh] external flow with snappyHexMesh	chelvistero	OpenFOAM Meshing & Mesh Conversion	11	January 15, 2010 19:43
unstructured vs. structured grids	Frank Muldoon	Main CFD Forum	1	January 5, 1999 10:09

All times are GMT -4. The time now is 19:28.