CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   centrifugal fan (https://www.cfd-online.com/Forums/cfx/21664-centrifugal-fan.html)

Txema October 3, 2005 09:19
centrifugal fan
 
I am starting to simulate a CENTRIFUGAL FAN. 1.I have made the rotor wiht turbogrid 1.6 2.I have made the volute with CFX-Mesh 3.I have put massflow at inlet and pressure at outlet 4.The interface between rotor-volute is a Frozen rotor.

could anyone give me advise?? 1.It is o.k to mesh with CFX-Mesh for volute? 2.How I can know if the mesh for the rotor and volute is o.K. 3.Wich type of interface I must put? 4.How I can model the gap between rotor(rotating) and inlet (static)

Results between experimental data and CFX data are quite diferent.

thank you

gogulakrishnan November 9, 2005 07:48
Re: centrifugal fan
 
I want to make a model of a doubble inlet centrifugal fan on cfd can u give guidelines

thanks

Txema November 11, 2005 06:15
Re: centrifugal fan
 
Star making the impeller with Turbogrid. Massflow at inlet and relaive presure at outlet=0 If you need more acurrate results, put the impeller into de volute.


All times are GMT -4. The time now is 13:50.