CFD Online Logo CFD Online URL
Home > Forums > CFX

transient analysis of silencer using cfx.

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   October 16, 2005, 04:48
Default transient analysis of silencer using cfx.
Posts: n/a
Hi 2 everybody.I am doing a transient analysis of a reactive silencer.I have done transient analysis but in post i am getting same results at each time step.what may be raeson.Inlet is given as pressure varying sinusodialy(because at inlet of silencer lob compressors are kept to fill flow into silencer) and at outlet ihave given velocity 22 m/sec.Now it may be possible that back presure is possible due to sinusodial nature,but i have adjusted it.i.e. avg presure for sinusodial inlet is kept 3.5 bar ,so no problem of back flow.Is this prob is related to time step.I have used time step of 0.002 sec.becasue compressor rotating with w=410 rpm,so 1/w=time.solver doesnot give any error.only all parameters are same at each time step.can anybody help me. Thanking you in advance.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
courant number for transient flow on CFX ? amine CFX 13 August 20, 2013 19:02
How to Check Mass Flow Rate in 2D Analysis - CFX nasir FLUENT 0 October 9, 2011 02:52
CFX 2D ANALYSIS BOUNDARY CONDITION fat bug CFX 1 February 19, 2008 17:22
Transient periodic analysis & Boundary conditions Michele FLUENT 0 March 25, 2006 17:07
biogas venturi mixer transient analysis pedro Main CFD Forum 0 January 23, 2006 20:45

All times are GMT -4. The time now is 22:25.