CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

baffle in flow route

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 24, 2005, 00:19
Default baffle in flow route
  #1
GaryWang
Guest
 
Posts: n/a
How can I make a volume mesh for an empty box which contains a thin baffle? This baffle was set at the center of this empty box. I have assign each parts e.g. pts, curves and surfaces including the baffle for my model and given them max mesh size. When meshing complete and transferring into CFX, I can not see the "baffle" part under the tree of assembly. But when I use scan-plane in ICEMCFD, I can be sure that nodes and vertices have been located on the baffle.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
Flow meter Design CD adapco Group Marketing Siemens 3 June 21, 2011 09:33
What is the difference between liquid reactive flow and gas reactive flow? James Main CFD Forum 6 May 15, 2009 13:14
potential flow vs. Euler flow curious ... Main CFD Forum 23 July 21, 2006 08:40
Plug Flow Franck Main CFD Forum 3 September 4, 2003 06:57


All times are GMT -4. The time now is 08:49.