CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

batch mode in CFX

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 22, 2005, 08:47
Default batch mode in CFX
  #1
mehul
Guest
 
Posts: n/a
Hi to all, I am workong on a silencer using cfx 10.I have to simulate four silencers,and all with some modifications.can any body tell me that how batch mode can be aplied t ocfx 10.i.e. i will apply different boundary conditions to one pre file (session file) and then run two or more solvers together.I think that i will have to make different def files and run toghether them,but how to run them is problem.i.e. i require some procedure or path.

Can any body help

Thanks in advance.
  Reply With Quote

Old   October 22, 2005, 10:01
Default Re: batch mode in CFX
  #2
henpeckedman
Guest
 
Posts: n/a
Why do you want to run more than one solvers together? If you just want to apply different boundary conditions to one pre file. You can edit each case in the pre then output respective def file, or you can edit the ccl file. The cases can be run sequently, if I did not misunderstand your question. Anyway, if you want to run the solver in batch mode, please refer to the manual: ANSYS CFX-Solver Manager, Release 10.0 | Starting CFX-Solver from the Command Line.
  Reply With Quote

Old   October 22, 2005, 11:15
Default Re: batch mode in CFX
  #3
mehul
Guest
 
Posts: n/a
ok thanks.My prob was to run simultaneously the prob,not together.It was my mistake to write. Thank u for ur guidance.
  Reply With Quote

Old   October 25, 2005, 09:52
Default Re: batch mode in CFX
  #4
Michael Bo Hansen
Guest
 
Posts: n/a
http://www.cfd-online.com/Forum/cfx_...cgi?read=11475
  Reply With Quote

Old   October 25, 2005, 10:00
Default Re: batch mode in CFX
  #5
mehul
Guest
 
Posts: n/a
Thanks very much Michael
  Reply With Quote

Old   October 26, 2005, 08:19
Default Re: batch mode in CFX
  #6
Korsh Mik
Guest
 
Posts: n/a
Yes, in the command line I can run CFX in the batch.

But in Pre option - start solver in batch gives me a response: ======= An error has occurred in CFX5solve

writemms exited with non-zero return code 1 =======
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Using Condor for batch queing with CFX ellevset CFX 3 June 16, 2016 13:09
fluent stops batch mode on error Ralf Schmidt FLUENT 1 March 1, 2008 11:35
Seek urgent help in batch mode Jack Martinez FLUENT 2 August 17, 2007 11:24
Meshing-only mode in CFX ? Nena CFX 0 August 10, 2007 06:03
Batch Mode (Urgent Help) Mahesh FLUENT 1 June 15, 2007 20:39


All times are GMT -4. The time now is 04:42.