CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Mesh: Import to CFX (http://www.cfd-online.com/Forums/cfx/21754-mesh-import-cfx.html)

DAK565656 October 26, 2005 02:14

Mesh: Import to CFX
 
I have no idea how to save mesh created in ICEM for CFX. I looked through tutorials. It is said to select OUTPUT tab and press button "output to cfx". The problem is that there is no such button in this tab

houman October 26, 2005 05:04

Re: Mesh: Import to CFX
 
Hallo DAK56565656,

Which version of ICEM are you working with? (example: ANSYS ICEM CFD 5.0(CFX/CFD))...

regards, houman

DAK565656 October 26, 2005 05:28

Re: Mesh: Import to CFX
 
ICEM CFD 10

Ram October 26, 2005 06:27

Re: Mesh: Import to CFX
 
In CFX-10 you will find 4 sub tabs Under Output to export mesh to CFX,CFX-4,Tascflow and Ansys. If you donīt find it could be installation problem.

DAK565656 October 26, 2005 06:40

Re: Mesh: Import to CFX
 
You meant in ICEM 10? There are following buttons: 1) select solver 2) boundary conditions 3) write input 4) edit parameters

longbow October 26, 2005 07:56

Re: Mesh: Import to CFX
 
First, you need to "select solver". Then "write input" file for CFX-Pre.

Myron October 26, 2005 09:22

Re: Mesh: Import to CFX
 
In version 10.0 - look for Output > Select Solver > Ansys CFX. Once in CFX-Pre - Import Mesh and specify ICEM CFD as the format.

Nepal November 19, 2005 20:42

Re: Mesh: Import to CFX
 
I am sure you are into the ICEMCFD_CFD mode instead of ICEMCFD_CFX mode. You can get into ICEMCFD_CFX by add a argument <font color=blue>-cfx</font> after your command.


All times are GMT -4. The time now is 03:47.