CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   mesh adaption (http://www.cfd-online.com/Forums/cfx/21764-mesh-adaption.html)

John October 27, 2005 14:22

mesh adaption
 
Hi, All,

If I apply mesh adaption in a steady state simulation, can I use the results as a initial condition for transient calculations?

Thanks!

John

Rui October 27, 2005 14:50

Re: mesh adaption
 
Hi,

If your .def file (the trasient .def file, in your case) contains a mesh different from the Initial Values File (the steady state .res file with mesh adaption), I think you'll get a message saying that mesh on .def file will be ignored and the Solver will use the .res mesh. But I'm not sure.

Try, and tell us how it works <big> : <font size=2>)</font></big>

Regards,

Rui

rajit December 1, 2005 01:46

Re: mesh adaption
 
In this case you can interpolate the mesh on to the definition file.

thanx rajit


All times are GMT -4. The time now is 14:32.