CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

hex mesh using cfx mesh.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 31, 2005, 07:56
Default hex mesh using cfx mesh.
  #1
mehul
Guest
 
Posts: n/a
Hi to all, i am using cfx 10.Earlier i have used cfx 5.6.I want to know is it possible to hex mesh using Ansys cfx 10 .If yes then how to do it? I know that in cfx 5.6 in patran mesh we can do it.But in cfx 10 mesh i do not know.i have to do FSI .so,I have to do flow analysis and i have to transfer that results (on surface) to ansys so that strucrural anlysis can be done.Pls also tell me that tet mesh will be suitable or not.Because i have tried by tet emesh andgot reults now i am thinking that hex will be suitable.iI want to know that whenever flow problems are done how much hex and tete mes hresults differ? pls reply me. Thaks
  Reply With Quote

Old   December 1, 2005, 01:41
Default Re: hex mesh using cfx mesh.
  #2
rajit
Guest
 
Posts: n/a
No unfortunately up till today CFX cannot create hex mesh.it is better if you can create HEX mesh in some other software and then use it for FSI.

if you flow is turbulent i would suggest go for tetrahedral elements because it reduces the numerical dispersion error.

thanks rajit
  Reply With Quote

Old   December 6, 2005, 11:43
Default Re: hex mesh using cfx mesh.
  #3
mehul
Guest
 
Posts: n/a
ok sir,thanx.but can u twll me what is numerical dispersion error.Is it related with stabilty?
  Reply With Quote

Old   December 12, 2005, 23:06
Default Re: hex mesh using cfx mesh.
  #4
rajit
Guest
 
Posts: n/a
Rather than me explaining it.It would be a good practice for you to read it for yourself.I think CFX-book has got the information regarding this..

Thanks Rajit
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mesh motion with Translation & Rotation Doginal CFX 2 January 12, 2014 07:21
CFX mesh refining and stiffening george CFX 3 September 3, 2008 06:31
hex mesh using cfx mesh. mehul CFX 0 October 31, 2005 08:01
How to control Minximum mesh space? hung FLUENT 7 April 18, 2005 10:38
importing mesh from ICEM CFD into CFX 5 Jay CFX 2 November 12, 2002 14:46


All times are GMT -4. The time now is 01:44.