|
[Sponsors] |
November 16, 2005, 10:28 |
Mesh Quality in CFX 5.7.1!
|
#1 |
Guest
Posts: n/a
|
Hi, all, I am using CFX5.7.1. When I use CFX-POST to check the mesh quality, I find that some undefined colors are around the wall. Anyone has the same experience? What could possibly cause this? Does this influence the simulation?
THX in advance! |
|
November 16, 2005, 11:50 |
Re: Mesh Quality in CFX 5.7.1!
|
#2 |
Guest
Posts: n/a
|
Hi UY, Check the quality of mesh in CFX-post i.e. Minimum angle, Volume element ratio etc. If all are O.K then there is no problem for simulation. I had similar experience with a grid generated in ICEM when the blocks of Hexa are assigned diferent part names.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] CGNS mesh failing in CFX | siw | ANSYS Meshing & Geometry | 5 | November 23, 2017 19:07 |
simulating 2D airfoil mesh in CFX | iffy | ANSYS Meshing & Geometry | 7 | January 24, 2017 03:05 |
3D Hybrid Mesh Errors | DarrenC | ANSYS Meshing & Geometry | 11 | August 5, 2013 06:42 |
running 2D airfoil mesh in CFX | iffy | ANSYS | 1 | February 13, 2011 21:35 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 18:10 |