CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   How the convergence is recognized in cfx (http://www.cfd-online.com/Forums/cfx/21839-how-convergence-recognized-cfx.html)

john November 17, 2005 10:01

How the convergence is recognized in cfx
 
How the convergence is recognized in cfx.i.e. how we can know that our prob has concerged or not?I know that if convergence has been done then even though iteration limit is not reached yet solution will be finished.but suppose iteration have been finished and convergence is not reached then what will be there?will solution will be done.and if yes then how accurate will be it?

M November 24, 2005 09:49

Re: How the convergence is recognized in cfx
 
If the tolerance setting fro convergence i.e 1.0E-04 as not been reached but the itteration limit has been reahed the solver will stop and the solution will not be fully converged. If this is the case set a higher itteration limit


All times are GMT -4. The time now is 01:49.