CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Cyclone Opening boundary Conditions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 16, 2005, 06:31
Default Cyclone Opening boundary Conditions
  #1
Michael Bo Hansen
Guest
 
Posts: n/a
Hi There.

Which Boundary conditions is the optimum choice of outlet/opening boundary condition for the swirling outlet of a cylone?
<LI>Cartesian Velocity Components, <LI>Cylindrical Velocity Components, <LI>Opening Pressure and Direction, <LI>Opening Pressure for Entrainment, <LI>Static Pressure and Direction, <LI>Static Pressure for Entrainment?
The Navier Stokes equations reveals that dP/dr = rho/r*Vteta^2 for a swirling flow, but should I implement that specifically, or can I use some of the above listed choices? Kind regards

- Michael
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Impinging Jet Boundary Conditions Anindya Main CFD Forum 25 February 27, 2016 13:58
non reflective boundary conditions for incompresible flow Pascal_doran OpenFOAM Programming & Development 16 August 25, 2015 06:35
Fluent accuracy and boundary conditions Paolo Lampitella FLUENT 0 June 12, 2008 07:25
Opening and Static Pressure Boundary conditions Zurayk CFX 4 April 5, 2007 12:39
A problem about setting boundary conditions lyang Main CFD Forum 0 September 19, 1999 19:29


All times are GMT -4. The time now is 11:05.