CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   how to view mesh (http://www.cfd-online.com/Forums/cfx/21977-how-view-mesh.html)

Ogbeni December 27, 2005 11:53

how to view mesh
 
Can anyone please tell me how to view a mesh in Post ? Thanks

Jeff December 27, 2005 16:09

Re: how to view mesh
 
Simply load the gtm file or the initial .def file.

You can display all the boundary conditions, or an arbitrary plane and "plot lines" under the rendering options to show the mesh.

Jeff

TB December 27, 2005 17:10

Re: how to view mesh
 
There are many ways to visualise your mesh. I often view the mesh on a cross-sectional plane. You need to create a plane & turn on the "draw line" option. For surface mesh, follow Jeff's suggestion.

Ogbeni December 27, 2005 18:25

Re: how to view mesh
 
Thanks Jeff and TB. I finally am able to see it.

Davide December 29, 2005 10:29

Re: how to view mesh
 
If you are interested just on view mesh, another simple way you can take into account is to view the mesh using the .res file. You can select the boundary surface (and/or the model part you want to see), and check on the "Render" panel. At this point, you can enable "Draw lines", then click on Apply. I hope it could be usefull for you.

Davide



All times are GMT -4. The time now is 00:07.