CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

ICEM-AUTOHEX

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 10, 2006, 09:59
Default ICEM-AUTOHEX
  #1
tommy
Guest
 
Posts: n/a
I perform an autohex mesh in a cubic cell by ANSYS ICEM CFD. Should I also performe "surface mesh" on my 6 families (they are each side of my cubic cell)?

best regards
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
PEM Fuel cell module meshes. ICEM vs workbench aarvay FLUENT 20 August 5, 2015 21:04
[ANSYS Meshing] Workbench 13: Structured Hexa Meshes rooftop ANSYS Meshing & Geometry 18 May 13, 2014 03:57
Design Modeler to ICEM..... Joe CFX 0 January 24, 2008 04:39
ICEM 10 mesh scale foe CFX Korsh Mik CFX 2 October 7, 2005 09:07
ICEM CFD 5.1 Hex-Tet mesh merging failure bogesz CFX 1 January 29, 2005 07:46


All times are GMT -4. The time now is 22:41.