|
[Sponsors] |
January 26, 2006, 17:20 |
Turbulent Flow
|
#1 |
Guest
Posts: n/a
|
I need to simulate turbulent crossflow through in-line and staggered banks of tubes. Which turbulent model would you recommend?
Thanks, Ari Guerrero. |
|
January 29, 2006, 17:27 |
Re: Turbulent Flow
|
#2 |
Guest
Posts: n/a
|
Hi,
k-eps is the usual choice and SST is increasingly being used. Depends on many things such as Reynolds number, type of separations, desired accuracy, degree of anisotropy etc etc. Glenn Horrocks |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
spectrum: LES of a turbulent channel flow finally goes to turbulent | liu | OpenFOAM Running, Solving & CFD | 6 | November 1, 2011 01:00 |
Difference between recirculation zone and turbulent flow region | ashtonJ | Main CFD Forum | 0 | September 16, 2011 03:46 |
Patch a bubble inside turbulent flow | Helmi | FLUENT | 0 | February 4, 2011 04:54 |
Turbulent flow through hexagonal circular pipe | yogesh@cfd | Main CFD Forum | 0 | November 9, 2010 23:10 |
Inviscid Drag at subsonic, subcritical Mach # | Axel Rohde | Main CFD Forum | 1 | November 19, 2001 12:19 |