CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Help! i need help Mesh volume problem (http://www.cfd-online.com/Forums/cfx/22111-help-i-need-help-mesh-volume-problem.html)

Sergi February 1, 2006 07:07

Help! i need help Mesh volume problem
 
Well, I am a beginner with Ansys. And i have this problem:

I have to to make a tunnel wind with a car (3D). I've modelled them and made blocks. So after that, i've made superface mesh from INLET OUTLET WALL1 WALL2 GROUND and CAR. After that i don't know what to do... i try to make volumen mesh, but near the car i havent boundary layers. So if some can help me.... pleaseeeeeeee

Thanks

Glenn Horrocks February 1, 2006 17:29

Re: Help! i need help Mesh volume problem
 
Hi,

Have a look at the tutorial example "Flow around a bluff body". That will give you a start on how to model these things.

Glenn Horrocks


All times are GMT -4. The time now is 10:14.