CFD Online Logo CFD Online URL
Home > Forums > CFX

Help! i need help Mesh volume problem

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 1, 2006, 07:07
Default Help! i need help Mesh volume problem
Posts: n/a
Well, I am a beginner with Ansys. And i have this problem:

I have to to make a tunnel wind with a car (3D). I've modelled them and made blocks. So after that, i've made superface mesh from INLET OUTLET WALL1 WALL2 GROUND and CAR. After that i don't know what to do... i try to make volumen mesh, but near the car i havent boundary layers. So if some can help me.... pleaseeeeeeee

  Reply With Quote

Old   February 1, 2006, 17:29
Default Re: Help! i need help Mesh volume problem
Glenn Horrocks
Posts: n/a

Have a look at the tutorial example "Flow around a bluff body". That will give you a start on how to model these things.

Glenn Horrocks
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
engineFoam new mesh problem ayhan515 OpenFOAM Meshing & Mesh Conversion 5 August 10, 2015 08:45
Anyone using GID mesher? problem with .igs file and volume mesh afo3 Main CFD Forum 1 November 24, 2010 14:31
Ansys 12 Workbench problem when generating volume mesh Sveink ANSYS 5 January 6, 2010 04:17
problem on volume mesh wan CFX 0 January 29, 2008 03:41
Volume mesh problem in STARDESIGN Jaedal CD-adapco 2 October 17, 2007 09:23

All times are GMT -4. The time now is 12:09.