CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

help with CFX-Post

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 1, 2006, 07:08
Default help with CFX-Post
  #1
akin
Guest
 
Posts: n/a
I have done simultion on a bluff body. Now I wish to plot some parameters around it. For instance I wish to make a plane along XZ axis, then plot the velocity. Is possible to place the plots on the plane ? if so how ? if it cannot be done in post, I will appreciate some suggestions on how to do it, I have a large amount of points and data to look at, so any automated method will be helpful. Thanks
  Reply With Quote

Old   February 1, 2006, 12:17
Default Re: help with CFX-Post
  #2
Adam
Guest
 
Posts: n/a
Yes, its all in the manual.

Make the plane and then choose the parameter. If you save the state file, then it'll have everything you need for the next time you load up some results.

Regards Adam
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX post legend modification mactech001 CFX 3 December 25, 2011 23:12
How to get reynolds stress values in POST CFX syler3321 CFX 5 March 17, 2011 01:23
CFX post - graph kmgraju CFX 0 July 22, 2010 11:59
Chart Generation in CFX Post Vadim Baines-Jones CFX 2 August 28, 2007 09:14
Tecplot for CFX post processing pantangi goud CFX 2 August 24, 2005 16:42


All times are GMT -4. The time now is 23:17.