CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

how to give particals info in cfx?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 15, 2006, 01:09
Default how to give particals info in cfx?
  #1
john
Guest
 
Posts: n/a
how to give particals in cfx?i.e. i have in my problemt ther are two phases.one is air and other is paricals.How i can apply in pre and how to proceed?and what is partical tracking in post? Thanku all.
  Reply With Quote

Old   February 19, 2006, 09:27
Default Re: how to give particals info in cfx?
  #2
Badrinath
Guest
 
Posts: n/a
U can give the paricles in the domain first u decide in which u zone u have to inject the particles and decide the size of the praticles and the distribution. U can see this in the domain specification or the boundary conditions.

comming to the post "the particle tracking is that u can trace the path of the particle which you have injected into the domain.

regards Badrinath
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX (Workbench) 3D Hard-Disk Space ERROR Engineers CFX 7 October 17, 2011 21:25
Pros and Cons for CFX, CFdesign, COMSOL Val Main CFD Forum 3 June 10, 2011 02:20
Import Fan 3D Model - Workbench or CFX? Stewart Long CFX 2 October 28, 2008 05:05
CFX 10's solutions differ from CFX 5.7's Atit Koonsrisuk CFX 4 July 26, 2006 11:59
ANSYS CFX Info Kiran CFX 6 May 30, 2006 14:17


All times are GMT -4. The time now is 09:04.