CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

rescue transient solver file

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 27, 2006, 19:41
Default rescue transient solver file
  #1
Andy
Guest
 
Posts: n/a
Hi,

I was running a transient simulation just now and was going to finish the run. However because of some unknown reasons the computer automatically restarted. Is it possible to rescue the solver solutions?

I appreciate your suggestions. Thanks!

Andy

  Reply With Quote

Old   February 27, 2006, 23:14
Default Re: rescue transient solver file
  #2
Robin
Guest
 
Posts: n/a
Hi Andy,

You can restart from a *_full.trn or a backup file by specifying the full or backup file in the initialization field. If you have neither, best to consider adding one to your output next time.

Regards, Robin
  Reply With Quote

Old   February 28, 2006, 11:19
Default Re: rescue transient solver file
  #3
Andy
Guest
 
Posts: n/a
Hi, Robin

Thanks for the suggestions!

Andy
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Working directory via command line Luiz CFX 4 March 6, 2011 21:02
Compiling gmshFoam with OpenFOAM-1.5 BlGene Open Source Meshers: Gmsh, Netgen, CGNS, ... 10 August 6, 2009 04:26
DxFoam reader update hjasak OpenFOAM Post-Processing 69 April 24, 2008 01:24
Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Native Meshers: blockMesh 10 April 2, 2007 14:00
PHI file structure Eugene Phoenics 9 November 2, 2001 23:00


All times are GMT -4. The time now is 07:48.