CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Mesh adaption (http://www.cfd-online.com/Forums/cfx/22239-mesh-adaption.html)

Andy March 2, 2006 12:04

Mesh adaption
 
Hi, All

When the mesh adaption is used, is it possible to show the mesh at different adaption steps(or time steps)?

Best regards!

Andy

opaque March 2, 2006 12:39

Re: Mesh adaption
 
Dear Andy,

Under Mesh Adaption, select the option Save Intermediate Files, and later on you can visualize independent files using CFX-Post..

Good luck, Opaque

Andy March 2, 2006 13:20

Re: Mesh adaption
 
Thank you, Opaque.

another question: Can I export the final mesh (after final adaption step) for future use?

Best regards!

Andy

opaque March 2, 2006 15:07

Re: Mesh adaption
 
Dear Andy,

Those intermediate files are just plain results files. You can use them with the cfxexport (if that is what you meant), or import the meshes from them in CFX-Pre to create a new case.

Good luck Opaque


Andy March 2, 2006 17:44

Re: Mesh adaption
 
Thanks, opaque.

Best regards!

Andy


All times are GMT -4. The time now is 04:01.