|
[Sponsors] |
April 4, 2006, 12:40 |
Menter one-equation k-epsilon model
|
#1 |
Guest
Posts: n/a
|
Hello, all,
Can anybody let me know how one can use Menter's one-equation k-epsilon model as the turbulence model? It's discussed in the CFX manual, which seems to say that it is available as an export control parameter in CFX-Pre, but it's not in the expert control parameters panel (or if it is, it's well-hidden). I'm using CFX-10.0. Best regards, MTogneri. |
|
April 4, 2006, 13:50 |
Re: Menter one-equation k-epsilon model
|
#2 |
Guest
Posts: n/a
|
Dear MTogneri,
An equation for k-epsilon has two equations.. You may be referring to the one-equation Menter model for turbulent eddy viscosity.. In CFX-Pre physics tree, use right click on TURBULENCE MODEL and select Edit in Command Editor.. Replace k epsilon (or whatever you already have) by Eddy Viscosity Transport Equation You must setup the k-epsilon (or other) first, so you will the boundary conditions right, then you can ignore the warnings that come from using the expert/hidden model. Good luck, Opaque |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Constant velocity of the material | Sas | CFX | 15 | July 13, 2010 08:56 |
k-e turbulence model and energy equation | Blob | Main CFD Forum | 0 | May 29, 2009 08:35 |
k and epsilon discretization of RNG model | mehran | Fidelity CFD | 0 | January 24, 2009 00:01 |
Derivation of k-e model from momentum equation | CFDtoy | Main CFD Forum | 5 | May 10, 2006 16:53 |
The effect of E term in the EPSILON equation | Valdemir G. Ferreira | Main CFD Forum | 6 | June 7, 2000 02:37 |