CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

probe

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 22, 2006, 06:03
Default probe
  #1
hydrogen
Guest
 
Posts: n/a
Hi!

I would like to know why it's not possible to use:

Entrada = probe(Mixture.H2 Ideal Gas.Mass Fraction)@Outlet

I've got this error:

ERROR #001100279 has occurred in subroutine ErrAction.

Message:

An error: Invalid locale in call back function probe on locale Outlet

Besides, I have an inlet which depends on this variable (Entrada) like that:

H2On = Sensor Function(Entrada,Limit,aitern) InletH2 --> Velocity Y = H2On*10 [m s^-1] Please, can anyone help me?

  Reply With Quote

Old   May 22, 2006, 11:50
Default Re: probe
  #2
opaque
Guest
 
Posts: n/a
Dear hydrogen,

Probe is a callback function that can only be used on point locators..

You can refer to a monitor point defined by Cartesian Coordinates, Source Point, or a Radiometer..

Good luck,

Opaque
  Reply With Quote

Old   May 22, 2006, 11:59
Default Re: probe
  #3
hydrogen=yolanda :-D
Guest
 
Posts: n/a
Yes, opaque. Both of us know that but it didn't work. This is the message I got:

The function 'probe' referenced in parameter 'V' in object '/FLOW/DOMAIN:Room/BOUNDARY:InletH2/BOUNDARY CONDITIONS/MASS AND MOMENTUM' has an invalid argument, 'Mixture.H2 Ideal Gas.Mass Fraction'. The prefixed variable is not valid in the context of the locator 'Detector'.

And Detector was a monitor point

Entrada=probe(Mixture.H2 Ideal Gas.Mass Fraction)@Detector

You told me that it could be because the pre-processor was "over-restrictive". What does that mean exactly? Thank you again!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
functionObject Probe: it's possible to stop and restart? ivan_cozza OpenFOAM Post-Processing 0 September 28, 2010 04:42
create a probe with fluent Aenseeiht FLUENT 3 April 29, 2010 03:27
save data output at specific point using probe foam_noob OpenFOAM 0 March 11, 2010 03:13
Using Probe for part of a patch ndr OpenFOAM Running, Solving & CFD 5 November 8, 2009 04:47
Using probe lengthening time of run saf5029 OpenFOAM Running, Solving & CFD 4 July 30, 2008 10:05


All times are GMT -4. The time now is 12:11.