CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Egg (http://www.cfd-online.com/Forums/cfx/22618-egg.html)

Astrid May 29, 2006 16:42

Egg
 
Hi all,

I would like to create a sort of an egg in Design modeller. Therefore, I need an ellipsoidal body with three different radii. Does anyone know how to do this?

I am not very familiar with DM but know how to draw an ellips.........

Astrid

Robin May 29, 2006 16:58

Re: Egg
 
Sketch it, then revolve it.

Astrid May 30, 2006 03:06

Re: Egg
 
Yes, but the radius over which I would like to revolve is is not constant. As I mentioned, it is SORT of an egg, with three different radii...

Astrid


Robin May 30, 2006 08:20

Re: Egg
 
There are a whole variety of 2D drawing tools. On the same plane, you can create multiple sketches, using one for reference geometry (such as your three cirles) and the other for the actual sketch you will revolve. For the working sketch I would use a polyline and contrain it to the circles.

-Robin

Michael Bo Hansen June 1, 2006 05:08

Re: Egg
 
Have you got SolidWorkS? I made an egg which you can get at ftp://michaelbo.com/cfd/egg.SLDPRT

Michael Bo

Michael Bo Hansen June 1, 2006 05:10

Re: Egg
 
sorry

www.michaelbo.com/cfd/egg.SLDPRT


Astrid June 1, 2006 05:53

Re: Egg
 
Hi Michael,

I am requested to give a login code and password. Hint???

Astrid

Michael Bo Hansen June 1, 2006 08:15

Re: Egg
 
send me your emailaddress.


All times are GMT -4. The time now is 06:28.