 |
 |
 |
|
|
|
[Sponsors] | ||||
May 29, 2006, 16:42
|
Egg
|
#1 |
|
Guest
Posts: n/a
|
Hi all,
I would like to create a sort of an egg in Design modeller. Therefore, I need an ellipsoidal body with three different radii. Does anyone know how to do this? I am not very familiar with DM but know how to draw an ellips......... Astrid |
|
|
||
|
May 29, 2006, 16:58
|
Re: Egg
|
#2 |
|
Guest
Posts: n/a
|
Sketch it, then revolve it.
|
|
|
|
||
|
May 30, 2006, 03:06
|
Re: Egg
|
#3 |
|
Guest
Posts: n/a
|
Yes, but the radius over which I would like to revolve is is not constant. As I mentioned, it is SORT of an egg, with three different radii...
Astrid |
|
|
|
||
|
May 30, 2006, 08:20
|
Re: Egg
|
#4 |
|
Guest
Posts: n/a
|
There are a whole variety of 2D drawing tools. On the same plane, you can create multiple sketches, using one for reference geometry (such as your three cirles) and the other for the actual sketch you will revolve. For the working sketch I would use a polyline and contrain it to the circles.
-Robin |
|
|
|
||
|
June 1, 2006, 05:08
|
Re: Egg
|
#5 |
|
Guest
Posts: n/a
|
Have you got SolidWorkS? I made an egg which you can get at ftp://michaelbo.com/cfd/egg.SLDPRT
Michael Bo |
|
|
|
||
|
June 1, 2006, 05:10
|
Re: Egg
|
#6 |
|
Guest
Posts: n/a
|
||
|
|
||
|
June 1, 2006, 05:53
|
Re: Egg
|
#7 |
|
Guest
Posts: n/a
|
Hi Michael,
I am requested to give a login code and password. Hint??? Astrid |
|
|
|
||
|
June 1, 2006, 08:15
|
Re: Egg
|
#8 |
|
Guest
Posts: n/a
|
send me your emailaddress.
|
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| heat transfer in egg - problem | Tiggr | FLUENT | 1 | June 24, 2009 09:55 |
Linear Mode
