|
[Sponsors] |
June 12, 2006, 05:55 |
TG-Mesh in CFX Post
|
#1 |
Guest
Posts: n/a
|
Hello. I have one ask for the use of a Turbogrid mesh in CFXpre. I want to connect a blade with a chamber. The chamber is a 10 degree cutout. The Outlet of Turbogrid is also ten degrees. The cutouts of TG are however not radial and therefore can both mesh´s not be connected. Does someone have an idea how to solve the problem ? Christian.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gambit problems | Althea | FLUENT | 22 | January 4, 2017 03:19 |
cfx mesh problem... | mactech001 | ANSYS Meshing & Geometry | 0 | November 5, 2009 02:19 |
CFX mesh & ICEM | mike | CFX | 3 | April 27, 2006 15:27 |
hex mesh using cfx mesh. | mehul | CFX | 3 | December 12, 2005 22:06 |
Mesh from ICEM CFD to CFX ! Error ! Why ? Thanks ! | Vu Trinh Tuan | CFX | 11 | March 28, 2005 19:04 |