CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Does CFX can output ".rth" file?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 23, 2006, 07:02
Default Does CFX can output ".rth" file?
  #1
prayskyer
Guest
 
Posts: n/a
Does CFX can output .rth file? or does that CFX-post can!?

biz,i want to output the distribution of temperature to ANSYs to computate the thermal stress.

hope someone can help me?

thanks
  Reply With Quote

Old   June 24, 2006, 21:35
Default Re: Does CFX can output ".rth" file?
  #2
Robin
Guest
 
Posts: n/a
From the Solver Manager, look for Export to ANSYS.

-Robin
  Reply With Quote

Old   June 24, 2006, 22:47
Default Re: Does CFX can output ".rth" file?
  #3
prayskyer
Guest
 
Posts: n/a
i tried this as you said!but,just .cdb &. csv ,which these two format are available?

where i can find .rth for export in CFX?

thanks!
  Reply With Quote

Old   June 25, 2006, 19:52
Default Re: Does CFX can output ".rth" file?
  #4
Robin
Guest
 
Posts: n/a
You can't export an RTH file, but the CDB file can be used to do what you are referring to. You'll have to check the ANSYS doc as to what to do with it. I think the heating coil tutorial in CFX may cover this to some extent.

-Robin
  Reply With Quote

Old   June 25, 2006, 20:00
Default Re: Does CFX can output ".rth" file?
  #5
prayskyer
Guest
 
Posts: n/a
thanks a lot,robin

i found that heatingcoil example,and trying hard to learn it!seems it refer to that MFS,how can i deal with that part!i think i am going forward so slow~

thanks all of u told me
  Reply With Quote

Old   July 7, 2006, 14:07
Default Re: Does CFX can output ".rth" file?
  #6
HekLer
Guest
 
Posts: n/a
The export from the CFX Solver Manager will require ANSYS Multiphysics. If you do not have that it will not work for you this way.

The other route is to import your ANSYS structural mesh into CFX Post using the option File -> ANSYS Import/Export. First export your surface mesh from ANSYS in CDB format, then import that into CFX Post using File -> ANSYS Import/Export -> Import ANSYS CDB Surface..., then use Export ANSYS Load file after than.
  Reply With Quote

Old   July 7, 2006, 20:08
Default Re: Does CFX can output ".rth" file?
  #7
prayskyer
Guest
 
Posts: n/a
thank you for your replyingthere are two Q i dn't know~

how t export surf mesh from ANSYS,is that format is CDB?

this is what i am understand,importing that surfmesh,and doing my calculation in CFX,and then output the result in the format of "rth" using that button,am i right?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
swak4foam building problem GGerber OpenFOAM Installation 54 April 24, 2015 16:02
GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh gschaider OpenFOAM 300 October 29, 2014 19:00
DxFoam reader update hjasak OpenFOAM Post-Processing 69 April 24, 2008 01:24
gcc and executable file from Mac to Linux simone Marras Main CFD Forum 0 April 8, 2007 15:49
Results saving in CFD hawk Main CFD Forum 16 July 21, 2005 20:51


All times are GMT -4. The time now is 04:14.