CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   multi phase simulation (http://www.cfd-online.com/Forums/cfx/22771-multi-phase-simulation.html)

Thandavan June 26, 2006 23:18

multi phase simulation
 
hi I am modeling gas solid flow. In pre I am getting the following error.

" Molar mass needs to be set up for Multi Component cases".I am not able to find out the error.

Please help me. Thanks in advance


hagupta June 27, 2006 07:37

Re: multi phase simulation
 
Hi Thandavan,

Is your gas a pure gas or a multi-component gas? Do check if the molar mass has been entered for all the components.

Thandavan June 27, 2006 22:56

Re: multi phase simulation
 
Hi hagupta, I have checked for all the compnents. the molar mass is specified. I donot know, still it persists..

hagupta June 28, 2006 07:36

Re: multi phase simulation
 
Have u also checked the molar mass option for the "Variable composition mixture" that u have used?

Thandavan June 28, 2006 23:29

Re: multi phase simulation
 
Hi, for me one fluid is variable composition kixture and the other is reactive mixture. I cannot set molar mass for the variable composition mixture. am i right. But i have set and checked it. still it is not working..

Any idea you have



All times are GMT -4. The time now is 20:16.