CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

water injection into air (not spray)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 11, 2006, 04:56
Default water injection into air (not spray)
  #1
bioman66
Guest
 
Posts: n/a
Hi everyone I want to simulate that model described as following: An horizontal injector was set 1.0 meter high above the ground and water injected from this injector and into air in 0.5 m/sec. Could I use CFX-10 to solve this problem? I have try two different settings: 1. free surface model; water and air are both continuous; homogeneous; 2. eulerian model; air is continuous and water is dispersed. But these two parameters also can not be calculated because of fetal error about linear solution. Who can teach me how to set correct domain conditions and boundary conditions?
  Reply With Quote

Old   July 11, 2006, 07:34
Default Re: water injection into air (not spray)
  #2
Joe
Guest
 
Posts: n/a
Read the "Best practices for multiphase flow" in the manual appendix.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
water spray in hot air krish FLUENT 6 April 3, 2013 09:58
water injection into air (spray) dzinks0 CFX 4 February 16, 2012 18:39
air bubble is disappear increasing time using vof xujjun CFX 9 June 9, 2009 08:59
Help!!!problems in air jet into water bath kim FLUENT 4 June 9, 2003 08:04


All times are GMT -4. The time now is 06:41.