CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Free Surface Simple problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 25, 2006, 07:19
Default Free Surface Simple problem
  #1
Luk
Guest
 
Posts: n/a
Dear All, I am new here, I came from Fluent Forum. I am completly new in Ansys and having some experience with Fluent I try to solve Fluent tutorials in Ansys as practice. I try to model rotating cylinder filled partly with water. There is air over the water surface. I proceed as follow: I created and mesh geometry consting of two meet cylinders. At bottom cylinder there is water fraction initiated to be unity. On the upper cylinder there is air fraction initiated to be unity (and water to 0). Both cylinders are along the same axis and are separated domains. I set an interface between them but I am not able to solve such a arrangement. Solver gives the message of error of too small memory amount (not possible). Pleasy, coule anyone advice the type of interface, is "air" cylinder should be set to be rotating domain, etc. I would be very grateful.

Luk
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX convergence issues with free surface adenlan CFX 3 September 2, 2011 06:43
Rising/falling free surface problem rjmcsherry CFX 4 September 2, 2011 04:46
Free surface volume problem Yogesh prajapati FLUENT 0 July 24, 2008 01:33
Free Surface Problem - Convergance Toby FLUENT 0 July 2, 2008 23:16
CFX4.3 -build analysis form Chie Min CFX 5 July 12, 2001 23:19


All times are GMT -4. The time now is 14:20.