CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Reference Density (expression) (http://www.cfd-online.com/Forums/cfx/22916-reference-density-expression.html)

Marco August 3, 2006 02:49

Reference Density (expression)
 
Can someone tell me what is wrong with this expression for Reference Density:

Reference Density = p/(R0*T) where R0=8314.5 [m^2 s^-2 K^-1](pressue is assumed to be in kg/ms2 I guess).

I got a warning telling that final unit is kg/m3K2, instead of kg/m3.

Thank you, Marco

Mike August 4, 2006 07:44

Re: Reference Density (expression)
 
There's nothing wrong with the expression shown above... check you didn't enter it as p/R0*T, since that could be interpreted as (p/R0)*T which would give the warning message. However, I'm not sure if you are allowed to set a variable Reference Density, I think may have to evaluate to a constant, so it can't depend on the solution variables p and T. I could be wrong here though. Mike


All times are GMT -4. The time now is 08:26.